|
Rank: Advanced Member Groups: Member
Joined: 2/21/2011 Posts: 437
|
Follow the drawing and not the instructions that came with or their updated ones. I made the mistake and dont have the patience to reeve it again... =>:-<
|
|
Rank: Advanced Member Groups: Member
Joined: 11/9/2009 Posts: 760 Location: Mexico...cabrones!
|
Reeving= frustration! At least for me in cookie crawlers. My 1600 is still in the box since last year. Jose.The proudly Mexican cookie monster!It's a diecast thing.You couldn't understand!
|
|
Rank: Member Groups: Member
Joined: 5/29/2014 Posts: 86 Location: HANGZHOU
|
J.Galvez wrote:Reeving= frustration! At least for me in cookie crawlers. My 1600 is still in the box since last year. absolutely right. black lines reeving black sheaves is a tragedy to my eyes. my second mammoet lr1600 with ycc brass mesh walkway is coming in september this year.
|
|
Rank: Advanced Member Groups: Member
Joined: 1/11/2007 Posts: 9,004 Location: Lincolnshire
|
Victor Pay wrote:Glad I could help I actually did mine recently and your diagrams were a God send! Once I figured it out, it only took an hour or so. Thank you! Paul R
|
|
Rank: Advanced Member Groups: Member
Joined: 6/9/2010 Posts: 287 Location: Brisbane ,Australia
|
The other thing to make it easy to reve is put a piece of blank white paper behind it so you don't get lost in the mix.
Wayne
|
|
Rank: Newbie Groups: Member
Joined: 6/12/2014 Posts: 4
|
That diagram pretty much explains it all right there. The more I study the diagram the easier it looks (looks can be deceiving)
|
|
Rank: Newbie Groups: Member
Joined: 6/12/2014 Posts: 4
|
Victor Pay wrote:I made two sketches myself. - one to show the "start in the middle" idea, with the according sheeve numbers from the diagram: - the other is a reeving diagram viewed from behind the crane, with the sheeves renumbered chronologically for each side. Left: 1--16, right 0-1--16. The big arrows after 16 go to the winchdrum. Thank you Victor
|
|
Rank: Member Groups: Member
Joined: 3/27/2017 Posts: 15
|
I just received my LR1600/2 and the instructions are insane as far as the reeving go's !!!! I have no idea how to reeve the a-frame being it's my first crane
|
|
Rank: Member Groups: Member
Joined: 9/13/2016 Posts: 14
|
Greetings All! Just received my LR1600 last night and got right to work reeving the A-Frame. Though I managed to muck something up, these instructions make far more sense than the included ones, and am excited at the prospect of having a balanced draw on the A-Frame, without having to draw the entire length of rope through each pulley. Anyone have any recommendations for lubricating the pulleys? I think some are rubbing excessively on my machine, and suspect it may be contributing to the issue I am having with reeving. I was thinking of sewing machine oil... Also want to express my gratitude to those of you who continue to go out of their way to support us less-experienced folks (Victor, Paul R, and Ian in particular). For those who have successfully reeved this monster (or any other of similar complexity), I salute you! o7 Now to watch the clock tick away the work day so I can return home and master this magnificent beast! P.S. Avoid the temptation to rest the A-Frame on the Erection cylinders while reeving... That was my first mistake
|
|
Rank: Advanced Member Groups: Member
Joined: 11/10/2010 Posts: 452 Location: Borden SK Canada
|
WD40 works great. Need a tiny bit and it rolls fine.
Mammoet- Size does Matter.
Dafgek
|
|
Guest |