Hi guys

Did some 3D drawing and printing again , this time a little attachment
Set contains 4 printed parts that need to be cut loose from each other.
You need to buy yourself at the hobbyshop : 800MM brass tube 4MM , and 300 MM round wood 6MM ( pole ).
And 2 screws M1 x 4 to connect it to the crane boom.
With some minor modifications this set can be used on a lot of other small size cranes.
It can be ordered here.

SHAPEWAYS

IMG_20181107_193410 by eef 7260, on Flickr"/>

IMG_20181107_193824 by eef 7260, on Flickr"/>

IMG_20181107_193449 by eef 7260, on Flickr"/>

IMG_20181107_193732 by eef 7260, on Flickr"/>

IMG_20181107_193546 by eef 7260, on Flickr"/>

---

***Flickr American cranes group***3D printed crane parts at I.materialise

That is just splendid. You may be the only one who has that attachment. Looks great. CAW