|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
   Lifting specialists have certainly noted that the rear left outrigger was blocked in closed position that day: it is therefore highly probable that the 1/50 crane driver cancelled any lifting. Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
  Scania/VDA R500 10x4/6 carrier with flatbed and Palfinger PK 150002 Performance G knuckleboom crane, towing a Jumbo 1+2-axle drawbar trailer with extendable low bed (WSI models). The combination is carrying a conventional 20' container and a tanker 20' container (Tekno models). To be continued. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Close view of the carrier which, with its powerful knuckleboom crane weights 36 tonnes, leaving a "small" 11 tonnes payload capability:   For more information on the Brouwer Scania truck: http://www.ditzj.de/html/en/trucks/scania/brouwerr500.html Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Homemade by Jean-François, a Gueguan tipping semi-trailer, equipped with a driven axle. The Renault tractor is a MiniCams kit:     Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Another tipping semi-trailer, homemade as well by Jean-Francois:  First road trials, before final fitting and paint:    Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/6/2015
Posts: 1,317
|
Guy again thanks for the info on the Sisu and those pictures of them really show a nice looking rig. Those dump trailers are interesting especially the one with the drive axle. I’m assuming the box in front of the axle is the power unit, what is it?
Thanks
Steve
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Steve,
Guegan built for some time semi-trailers with an hydraulically-driven axle, which could in some ways replace heavier 6x4 tipping units, when used with a conventional 4x2 tractor.
The box below the frame is indeed where hydraulic elements are housed.
Regards.
Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/6/2015
Posts: 1,317
|
Guy thanks for the response I have never seen one of those very interesting. Would you have a link to a company that manufactures these.
Thanks
Steve
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Steve, Axle-driven semi-trailers were mainly produced in France by Sebmo, Guegan and Fruehauf-France: their use remained limited to tippers mainly and dropped dramatically as 8x4 accepting 32 tonnes were developped. Poclain Hydraulics (France) was a forerunner in that field and is still producing most of the hydraulically-driven axles today (on the MAN Hydrodrive for example): https://www.poclain-hydraulics.com/fr/In UK, Multidrive went another way, with a shaft running from the tractor to power semi-trailer axles. That company is still in existence: https://multidrivevehicles.com/Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/6/2015
Posts: 1,317
|
Guy again thanks for the information and links, very interesting.
Steve
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Kahl Schwerlast GmbH heavy haulage combination, a company located in Moers (Germany):   MAN/ES-GE TGX 41-680 BBS 10x4/6 tractor and 4-line Goldhofer STHP-L4 modular semi-trailer with bed extension (modified Conrad models) loaded with a 66 tonnes KHD Humboldt Wedag SC5-2 cement kiln centrifugal decanter (homemade load). To be continued. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Berliet TR250 tractor and Coder box semi-trailer (Minitrucks kits):     Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Berliet TLM 280 tractor (MiniCams kit) and Trailor box semi-trailer (Minitrucks kit):    Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Haulage, by a Mammoet subcontractor, of elements of their 1200 tonnes capacity road crane:  DAF FAD XF105-510 8x4/4 carrier fitted with a bed and a Hiab XS 800-E9 knuckleboom hydraulic crane (Tekno models), loaded with 2 outriggers base plates plus 320 and 112 tonnes capacity hooks (7.6 + 4.5 tonnes respectively) of the Liebherr LTM 11200-9.1 crane (NZG elements). In tow, a GS Meppel 1+2-axle drawbar trailer with extendable low bed (Tekno model) carrying the lattice boom head, 2 outriggers base plates and the 363T hook of 9.5 tonnes (NZG elements)    Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
  Kenworth W 900L 6x4/2 tractor (modified Norscot model) and Doonan Black Gold 3-axle low bed semi-trailer (modified Conrad model) carrying a 6.2 tonnes Caterpillar 416 4x2/2 backhoe-loader (NZG model) and a 15.42 tonnes John Deere 764 HSD high speed articulated bulldozer equipped with a double track system (Ertl model)   Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
  International 7500i 8x4/2 tipper (Conrad model) and 2-axle "tag-a-long" trailer of unknown brand (First Gear model) loaded with a 20.09 tonnes Case 1850 K Series III bulldozer (Ertl model)  Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Instead of simply delivering their engines to the "Class 8" US truck market, Caterpillar decided some time ago to become a truck builder with a torpedo range built for them by Navistar. That deal terminated after a few years of collaboration.   Caterpillar C660/13 6x4/2 tractor and Trail King TK 110 HDG 3-axle lowboy carrying a Caterpillar 950 H articulated 4x4 wheeled loader of 18.5 tonnes (Norscot models)   Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/4/2005
Posts: 3,341
Location: Le Muy - Var - France
|
Unic V8 tractor towing various semi-trailers (Minitrucks kit):     Both tipper and tractor at rear (Hanomag-Henschel and Berliet) have been built from Minitrucks kits as well, while the Citroen van is from Minicirque origin. Regards. Guy
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/6/2015
Posts: 1,317
|
Guy the W900 looks 100% better than the regular Norscot Pete. Very nice modification on that one.
Steve
|
|
|
Guest |