|
Rank: Advanced Member Groups: Member
Joined: 6/5/2007 Posts: 2,766 Location: Sarasota, Florida, USA
|
Pretty good looking so far!!!
Bob, I saw that also and figured it was a project that "bombed"!!!LMAO
Or I thought that was a project ender if it went south and wasn't what was intented, LMAO!!!!
Keep up the good craftsmanship Manitowoc, looks good so far and pardon my humor on the bomb, don't see those standing around very many shops!!!
Dain
I'm a kid at heart, so I will play with any model construction vehicle from 1:87 scale to 1:1 scale!!!!
Age is a state of time NOT a state of mind!!
|
|
Rank: Advanced Member Groups: Member
Joined: 5/18/2008 Posts: 515 Location: Richfield, Oh (Cleveland)
|
I only wish some of my (I like to call my failures "proto-types") ended with me being able to blow them up. I used to do that with model cars and M80's. Thanks for the words of encouragement.
|
|
Rank: Advanced Member Groups: Member
Joined: 8/12/2007 Posts: 1,122 Location: North West England
|
I'm loving this. I've thought of building a flat-top barge in 1/50 (not as ambitious as yours!) like those of Dutch operator Van der Wees.
It's really helpful to see the way you're constructing it - please keep going with the pics regualarly.
Tim
Heavy Equipment Model Show Turf Moor, Burnley Football Club, Burnley, Lancs, UK. Sunday October 16th 2016
|
|
Rank: Advanced Member Groups: Member
Joined: 5/18/2008 Posts: 515 Location: Richfield, Oh (Cleveland)
|
|
|
Rank: Advanced Member Groups: Member
Joined: 3/14/2005 Posts: 427 Location: Co. Sligo, Ireland (Galway)
|
Manitowoc wrote:It actually is 1:50. But since it is an ocean going barge it is large in nature. Here is an example of one next to the typical inland waterways barge. Note the crawler crane and "A" frame on the smaller barge: Graham was recently asking me how I was going to launch my CW-3 barge suggesting an LR/LG1750 possibly but I think I found the crane to lift it in Keep the progress pictures coming... Engineering; Its all STRESS and not just Force over Area!
|
|
Rank: Advanced Member Groups: Member
Joined: 5/18/2008 Posts: 515 Location: Richfield, Oh (Cleveland)
|
Some more progress:
|
|
Rank: Advanced Member Groups: Member
Joined: 9/22/2007 Posts: 5,860 Location: Louisville
|
its looking good, keep the pics coming happy Derby!!!
Brandon my youtube channelMy Facebook Page
|
|
Rank: Advanced Member Groups: Member
Joined: 10/7/2005 Posts: 2,495 Location: Shetland
|
This is excellent and I just can't wait to see the finished vessel
Scania V8. The best sounding truck in the world.
|
|
Rank: Advanced Member Groups: Member
Joined: 2/5/2009 Posts: 1,990 Location: waterford ireland
|
fantastic workmanship, when i extend the model room i hope to put in a nice workshop beside it this will be a fantastic model when you are finished. by the way nice wallpaper
|
|
Rank: Advanced Member Groups: Member
Joined: 2/11/2003 Posts: 1,326 Location: Street, UK
|
Good to see some modelling on this forum, will be following your project.
regards Kevin
|
|
Rank: Advanced Member Groups: Member
Joined: 5/18/2008 Posts: 515 Location: Richfield, Oh (Cleveland)
|
|
|
Rank: Advanced Member Groups: Member
Joined: 2/5/2008 Posts: 693 Location: Pittsburgh,PA
|
I see you're gettin crazy Clay What size are those bearings? Those look similar size to the ones I have. I finally fitted my fairlead sheave bearings this week. I also secured the fairlead structure so I can try the semi finished bucket. 9W Walking Dragline Build Links:http://www.rctruckandconstruction.com/showthread.php?t=117Scale 4x4 RC Buildhttp://www.youtube.com/user/Scentlessapprentice9?feature=mhee#p/u/9/59FR27c9BwEhttp://imageshack.us/user/caffco
|
|
Rank: Advanced Member Groups: Member
Joined: 12/25/2007 Posts: 1,358 Location: Kodiak Ak.
|
Beautiful work Clay! I'm really jealous of your tools. I could probably buy some just like them, but the knowledge to get them to do what I want with them is the problem.
|
|
Rank: Advanced Member Groups: Member
Joined: 5/18/2008 Posts: 515 Location: Richfield, Oh (Cleveland)
|
Steve, They are 5x8.2.5. I would have preferred a slightly smaller ID, but since I have to bore out the sheaves and make the pins anyway, these will work out nicely. These are sealed too. I got them off of eBay. Lashlander, I haven't let my lack of machining knowledge get in my way. I can duck to the left or right just as fast to get out of the way of what comes flying out of the chuck.
|
|
Rank: Advanced Member Groups: Member
Joined: 8/8/2002 Posts: 5,515 Location: New Jersey
|
EDM machine would make all that work a lot easier ... after all just a few bucks ! Chet
I live in my own little world it's ok they know me here
|
|
Rank: Advanced Member Groups: Member
Joined: 6/1/2006 Posts: 4,065 Location: Dublin Ireland
|
LatticeCraneMan wrote:EDM machine would make all that work a lot easier ... after all just a few bucks ! LOL they would certainly!! excellent work!!! I love to see metal being machined
Why is "phonetically" spelt with a "ph"? ... It's better to be silent and thought a fool, then to speak up and remove all doubt The complex of Newgrange was originally built between c. 3100 and 2900 BC,[2] meaning that it's aproximately 5,000 years old. According to Carbon-14 dates,[3] it is more than 500 years older than the Great Pyramid of Giza in Egypt, and predates Stonehenge by about 1,000 years.
|
|
Guest |