|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
Jack. wrote:That soilmec crane is nice, anybody got any info on it? Price, Manufacturer, Where to find it? Unknown Chinese manufacturer, just like the SR-70 and SR-100 models. Price was €230 euro's at Bauma. But it was said to be €250 euro's in the Soilmec shop after Bauma. I expect DHS to have it as well in a few weeks / months.
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/11/2006
Posts: 3,421
Location: UK
|
Thanks Remko, But at that Price , I will give it a miss 
Heavy Cranes
|
|
Rank: Advanced Member
Groups: Member
Joined: 10/7/2005
Posts: 2,495
Location: Shetland
|
Yes, it does leave you wondering who's right!.
I have heard from another source that it was due later this year so hopefully that combined with the info from the Terex Shop strengthens the case for it.
Personally, I'd consider it a bit daft to put a lot of time and effort into a model to the point of unveiling a scale proto-type then not produce it.
On the basis of it is being produced, it would be nice if Conrad would just come out and confirm it.
Scania V8. The best sounding truck in the world.
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/19/2006
Posts: 252
Location: Denver, Colorado/Edmonton, Alberta Canada
|
For the new Hitachi excavators that were released, is DHS selling them or do you get them through Hitachi? Does Hitachi have a web shop for hats and shirts in the USA? I can only find a europe one. Thanks, Aaron
Aaron Equipmentphotos303 Flickr Photo Page
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2006
Posts: 2,491
Location: Buffalo, NY
|
So the only new CAT models that were there or announced are the 336E, 988K, an updated version of the 7495 and the dragline?
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/21/2007
Posts: 1,765
Location: Derbyshire,UK
|
That Hitachi 470-5 is epic! Im deffinately adding that to my collection at some point!
|
|
Rank: Advanced Member
Groups: Member
Joined: 6/9/2010
Posts: 779
Location: Alessandria, Italy
|
hang330c wrote:89cxsport wrote:Does anybody know anything about this model? Exclusive model for Bauma, limited edition of 300 Sold as a set. That's right. It's a limited edition Scheuerle-Bauma 2013; the prime mover is Mercedes Actros Mp3 4-axle and 6-axle Intercombi with power booster PPU in the red Scheuerle factory colours; the load is a Hitachi 870LCH.
|
|
Rank: Advanced Member
Groups: Member
Joined: 6/18/2008
Posts: 245
Location: Switzerland
|
Model is like at the picture. The red six axle wit Powerpack is another set. Daniel
www.lasterundbagger.net
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
As most of the new models have already been posted, I will not repost the same. But here are a couple not yet shown. Sennebogen 8130 EQ material handler. Very nice model, although at closer inspection the undercarriage is mostly plastic, and doesn't look very sturdy. Still, price is said to be € 129 euro's in Europe, same as the 690 with grab and dragline and the 5500 crawler crane.   
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
And a couple of the Terex CC 3800. They removed the counterweights on the second day, and moved the crane so the jib rested against the corner of the glass. The model was mostly plastic, and this in combination with a glass displaycase and direct sunlight several parts were starting to bent...   
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
A few others. Liebherr LTM 1500-8.1 in factory livery.  Price...  LTC 1045-3.1  Liebherr L 580 log handler. Of course I picked this baby up! Especially because I had already built one a few years ago.  Liebherr L 506 Compact wheelloader. I got this as well to expand my wheelloader collection. I thought I was about finished with it, but Liebherr released no less than 4 new wheelloader models at Bauma.. Well, still two to go...  
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
Final batch for now. These were available in the HTM shop. They look quite nice, although a bit too green for me... If they were darkblue I probably would have gotten one.   We noticed this though... To fit the quickcoupler of the R 954B HRD boom to the short stick of the R 954C they had to make it smaller.  And the Wirtgen W250i milling machine. Amazing model for a very reasonable price!  And my personal favorite. The Wirtgen 4200SM Surface Miner. They had the real thing as well at the stand, and I have a photo of me posing next to it.  That's it for now. I have a few more, among them the new WSI Vögele pavers, but have to upload them first.
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 1/11/2007
Posts: 9,028
Location: Lincolnshire
|
Remko wrote:
Liebherr LTM 1500-8.1 In Mammoet livery... I don't understand the fuss about this model though... But I'm not really a crane guy.
Because it is one of Liebherr's most successful cranes and has been asked for by collectors for 15 years! There are also some killer liveries out there. Great job on all the photos! Paul R
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
Paul R wrote:Because it is one of Liebherr's most successful cranes and has been asked for by collectors for 15 years! There are also some killer liveries out there. Well, hope the crane guys are happy with the model. I must admit, it looks very good. Paul R wrote:Great job on all the photos! Thanks, all with my iPhone, and I have to say not bad at all! Here are some more I made with my camera. Zoomlion and Sany also had some models available. Sany had their new giant concrete pump for example, based on the large crane undercarriage. It was in 1:50th and was priced at € 200 euro's. Zoomlion had a beautiful foundation machine on display. It was based on a Caterpillar excavator, but wasn't 1:50th. I now regret not getting any pictures of it though... The diorama at the Mammoet shop, including the new LR 1600/2, LTM 1500-8.1 and new Faun ATF 70G cranes.   Nice detail...  
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
A very nice diorama at the Caterpillar stand.   Small excavator in the Cat Merchandise shop...   Caterpillar 7495.   Cat 988K sample model. Looks good. 
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
And some more of the new Wirtgen group models. Hamm H13i rollers. I got both of them, but haven´t gotten around taking any pictures of them yet.  Vögele 1800-3i tracked paver.  Vögele 1803-3i wheeled paver.  Wirtgen W250i milling machine. Can´t wait to get my hands on this baby!! 
Remko Ocean Traders Scale Models Facebook Group
|
|
Rank: Advanced Member
Groups: Member
Joined: 11/16/2006
Posts: 5,408
Location: Houten, The Netherlands
|
|
|
Rank: Advanced Member
Groups: Member
Joined: 9/8/2008
Posts: 1,857
Location: Wheeling, WV
|
What a beautiful machine!
Thanks for sharing!
Colter
ddbcustommodels.com
Real men drive diesels!
|
|
|
Guest |
